EcoFlow DELTA 3 Max
120V · LFP · 20.3 kg · No expansion capacity recorded
A high-power heater can work on an appropriately rated station, but usable battery energy determines how short the session may be. Here is the calculation.

An electrically compatible 1,000Wh station has about 800 usable Wh under our planning assumption. At 1,500W, that is 32 powered operating minutes. Output capability and energy storage are separate checks.
| Nameplate capacity | Usable Wh (80%) | 1,500W setting | 750W setting |
|---|---|---|---|
| 500Wh | 400Wh | 16 minutes | 32 minutes |
| 1,000Wh | 800Wh | 32 minutes | 64 minutes |
| 2,000Wh | 1,600Wh | 64 minutes | 128 minutes |
| 3,600Wh | 2,880Wh | 115 minutes | 230 minutes |
These are powered on-time estimates at the stated setting, not measured product tests. A thermostat can reduce elapsed energy use; cold conditions and actual operating patterns matter. Capacity does not show whether an inverter can supply the required watts.
Our engine adds 10% inverter headroom. A 1,500W heater therefore needs at least 1,650W of continuous output in this model. Do not use a brief surge or resistive boost rating as the continuous rating. Follow the heater and station manufacturers’ connection and operating instructions.
One hour at 1,500W uses 1,500Wh; the 25% planning allowance calls for 1,875Wh of nameplate capacity, rounded upward by the engine. These single-unit candidates meet that screen. Other loads consume additional energy.
120V · LFP · 20.3 kg · No expansion capacity recorded
120V · LFP · Unpublished · Expansion ceiling: 10,000Wh
120V · LFP · 24.2 kg · No expansion capacity recorded
A 100W load on the same 1,000Wh battery has an energy-only runtime of 8 operating hours. An appropriately used heated blanket may need much less power than room heating; check its actual rating and instructions. Keeping a whole room warm remains a separate planning problem.