Find your setup

Watts vs watt-hours: the two numbers that decide everything

Every battery power station advertises two headline numbers: rated output in watts and capacity in watt-hours. They look similar, sound similar, and most buyers treat them as interchangeable. They're not — they answer completely different questions, and mixing them up is the #1 reason people buy the wrong station.

A timber and stone home with warm windows at dusk.
Illustrative scene · plan for your own appliances and operating conditions.
Quick answer
Watts determine what you can run simultaneously (inverter rating). Watt-hours determine how long you can run it (battery capacity). A 1,000W/1,000Wh station runs a 100W device for ~8.5 hours.

Speed vs distance

POWER · W

What can it run?

Continuous output and startup limits must both cover your load.

ENERGY · Wh

How long can it last?

800 usable Wh
Example: 1,000Wh rated × 80% usable
  • 100W load8.0 operating h
  • 56W CPAP load14.3 operating h
  • 1,500W heater0.5 operating h
Energy-only examples. Output, voltage and startup compatibility must be checked separately. This is a calculation, not a measured battery test.

Think of it this way: watts is speed (how fast you're draining the battery right now) and watt-hours is distance (how much total energy the battery holds). A car with a top speed of 120 mph and a 15-gallon tank can go fast, but not far. A car with a top speed of 60 mph and a 20-gallon tank goes slower but lasts longer.

In power-station terms:

Why both numbers matter — and why neither is enough alone

A station with 3,600W output but only 512Wh capacity is like a sports car with a tiny tank: it can power anything you plug in, but only for minutes. A station with 300W output and 3,000Wh capacity is like a truck with a huge tank: it runs forever, but can't power anything heavy.

The trap: marketing leads with whichever number looks bigger. A "3,000W" station sounds impressive until you read the fine print: "3,000W surge, 1,200W rated, 600Wh capacity." Now you have a station that can absorb a brief spike but can only sustain 1,200W and runs out in under an hour at that load.

The third number nobody mentions: duty cycle

Here's where it gets interesting — and where most sizing guides fail. Your refrigerator doesn't run 24/7. Its compressor cycles on and off; the actual energy it uses per day depends on its duty cycle (what fraction of the time the compressor is running), which we source from U.S. DOE and ENERGY STAR data.

A typical fridge draws 125W when running, but only runs about 8 hours per day. Daily energy = 125W × 8h = 1,000Wh. That's what determines your battery needs — not the running watts alone.

Real runtime examples from our verified data

DeviceRunning WDaily energy useEnergy-only example: 1,000Wh
Refrigerator (top-freezer, ~16 cu ft)125 W1,000 Wh6.4 powered hours
CPAP Machine (ResMed AirSense 11, with humidifier)56 W448 Wh14.3 powered hours
LED Bulb (60W equivalent)9 W45 Wh88.9 powered hours
RV Rooftop AC (13,500 BTU)1800 W14,400 Wh0.4 powered hours
Router + Modem15 W360 Wh53.3 powered hours

Powered operating hours use 80% usable energy and one continuous load. These examples do not establish compatibility with a real station. Daily energy uses the library’s typical usage hours; elapsed duty-cycle runtime can differ.

How to read a power station's spec sheet

  1. Rated output (W continuous) — must exceed the sum of your devices' running watts, plus ~10% headroom.
  2. Surge/peak rating (W) — must exceed your largest device's startup spike. More on that in our startup surge guide.
  3. Capacity (Wh) — must cover your total daily energy use (all devices' watts × hours), with ~25% margin.
  4. Expandability (Wh max) — if you can add battery packs later, this is your ceiling.

Our calculator handles all four automatically from your device selection — the same engine that powers every page on this site.

Frequently asked questions

What is the difference between watts and watt-hours?

Watts (W) measure power — how much electricity a device is drawing right now. Watt-hours (Wh) measure energy — the total amount consumed over time. A 100W bulb left on for 10 hours uses 1,000 watt-hours (100W × 10h = 1,000Wh). Think of watts as speed and watt-hours as distance: watts tell you how fast you're draining the battery, watt-hours tell you how long it lasts.

Why do power stations advertise both W and Wh?

The watt rating (e.g., "1,000W output") tells you what you can run simultaneously — it's the inverter's continuous output ceiling. The watt-hour rating (e.g., "1,000Wh capacity") tells you how long you can run things — it's the battery's total energy storage. A station with 1,000W output and 1,000Wh capacity can run a 1,000W device for about 1 hour (minus inverter losses).

How do I calculate how long a battery station will last?

Apply the usable-capacity factor once, then divide by load watts. Our planning factor is 80%: 1,000Wh × 0.8 ÷ 100W = 8 powered operating hours. The station must also satisfy output, startup and voltage limits.