Amps to Volts Calculator
Voltage (V) = Watts ÷ (Amps × PF)
1,500W at 12.5A means the system is running at 120V. This direction is handy for reverse-engineering nameplates: if a spec sheet lists watts and amps but not the operating voltage, dividing recovers it.
Updated · Calculated examples; assumptions and safety notes below.
Power/current pairs to voltage (PF 1.0)
| 1,200W | 100A | 12V (small solar/battery bank) |
| 1,200W | 50A | 24V |
| 1,200W | 25A | 48V |
| 300W | 25A | 12V (12V DC fridge) |
| 100W | 5.5A | ≈18V (a "12V" solar panel's Vmp) |
Single-phase AC at the stated power factor, or DC where PF does not apply. These are arithmetic conversions, not wiring recommendations.
FAQ
How do I find volts from watts and amps?
Divide watts by amps (÷ PF if not resistive). 1,200W ÷ 100A = 12V. It is the same Ohm's-law triangle as the other two directions.
Why does a "12V" solar panel show 18V when I divide?
Panel specs list Vmp (voltage at maximum power), which sits well above the battery's nominal 12V — that headroom is what charges the battery through a controller. Nominal system voltage and actual operating voltage are different labels.