Find your setup

Battery Charge Time Calculator

Hours = Wh ÷ (Charger Watts × Efficiency)

A 1,200Wh battery on a 120W charger takes ~11.8 hours from empty (at 85% charging efficiency). Charging is not 100% efficient — conversion heat and charging-profile taper (fast bulk phase, slow final top-off) mean real wall-clock time runs 15–30% longer than the naive division.

Updated

Compare sunny and low-sun recharging ↓

Your numbers, clearly calculated
Hours from empty to full11.76 hours

Solar recharge and backup load

Compare how much charge your panels can restore on two days and how much of your daily appliance use the solar harvest can replace.

Peak sun hours express sunlight as equivalent full-sun hours. Enter two local estimates to see how a lower-sun day changes your plan.

Adjust panel and conversion losses

The panel output factor accounts for losses such as heat and wiring at equivalent full sun. Use the sun-hours inputs for weather, shade and panel angle. Charging and AC delivery efficiencies are applied in sequence.

Modeled solar input 250 W during equivalent full sun, limited by the station's rated input.

Daily solar recharge estimates
EnergySunny dayLow-sun day
Energy stored with appliances off840 Wh337.5 Wh
Still needed to fill the battery0 Wh502.5 Wh
Potential solar energy for AC loads720 Wh270 Wh
Daily AC load shortfall180 Wh630 Wh

Stored energy is capped by the empty space in the battery. The daily AC shortfall compares the day's potential solar harvest with your load, assuming the energy can be used or stored when it arrives. Check overnight battery capacity and startup watts separately.

Verify the station's supported solar voltage and current against your panel configuration. Shading, changing weather and charge taper can reduce actual input.

Calculate your appliance loads →

Charge times for a 1,200Wh battery (85% efficiency)

Empty-to-full wall-clock estimates by charger output.
ChargerOutputTime to full
12V car outlet~96W~14.7 hours
AC wall adapter200W~7.1 hours
Fast AC (typical station max)600W~2.4 hours
Hybrid AC+solar1,000W~1.4 hours

Solar charging adds weather uncertainty on top: a "200W" panel realistically delivers 60–80% of its rating in good sun and far less when clouded or angled poorly. Size any recharge plan around panels with that haircut applied.

FAQ

How long to charge a 1,000Wh power station?

Divide 1,000 by (charger watts × 0.85). A 200W adapter: ~5.9h. A 600W fast charger: ~2h. Solar at a realistic 150W input: ~7.4h of good sun.

Why is my station's last 20% so slow?

Lithium charging tapers: the battery-management system cuts current as cells approach full to limit stress. The "hours to full" estimate blends the fast bulk phase with this slow finish — the final stretch routinely takes a third of the total time.

Is fast charging bad for the battery?

Most quality stations manage charge profiles internally and warranty fast charging. Heat is the real enemy: charge in shade and ventilation, and slow charging (or charging to 80–90%) extends cycle life if the station allows a charge limit.

Related tools