Find your setup

Watts to VA Calculator

Apparent power (VA) = Watts ÷ Power Factor

1,200W at power factor 0.8 is 1,500VA. At PF 1.0 it is 1,200VA. Watts measure real power; VA measures apparent power (voltage × current, phase alignment ignored). Dividing by power factor converts between them: W ÷ PF = VA. The smaller the PF, the bigger the gap.

Updated · Calculated examples; assumptions and safety notes below.

Your numbers, clearly calculated
Apparent power1,500 VA

Watts to VA conversion table

<tr><th scope="col">Watts</th><th scope="col">PF 1.0</th><th scope="col">PF 0.8</th><th scope="col">PF 0.6</th></tr>
Apparent power for common real-power loads at three power factors. PF 1.0 = resistive loads; 0.8 is a typical motor example, not a default for unknown equipment.
500W500 VA625 VA833 VA
1,000W1,000 VA1,250 VA1,667 VA
1,200W1,200 VA1,500 VA2,000 VA
1,500W1,500 VA1,875 VA2,500 VA
2,000W2,000 VA2,500 VA3,333 VA
3,000W3,000 VA3,750 VA5,000 VA
5,000W5,000 VA6,250 VA8,333 VA

FAQ

How do I convert watts to VA?

Divide watts by the load's power factor: VA = W ÷ PF. 1,200W at PF 0.8 is 1,500VA. Without a known power factor the conversion is undefined — plausible PFs from 0.6 to 1.0 span a 40% range.

Why do inverters have both a W and a VA rating?

The W rating reflects engine/alternator real-power capacity; the VA (or current) rating reflects wiring and inverter thermal limits. A 1,200W load at PF 0.8 pulls 1,500VA — inside the W limit but at the apparent-power edge of a "1,200VA" wire path.

Is VA higher than watts?

Always equal or higher — PF can't exceed 1.0. The gap is current that sloshes between source and load each cycle without doing work, but it still heats wires and trips breakers.

Related tools